Peugeot 108 Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
So, today i was in a rebel mood, so i started to take a part the radio chassis.
First i took off the silver front like also the touchscreen version is done.
After this i took the ventilation bezel of (the one on top of the dashboard).
This gave me access to the radio and showed me some stickers.

Content:
Type: CQ-SS94F
Automotive Systems Czech s.r.o
10R-03 12883

I couldn't find the remaining clicks that would unleash the radio itself, so i couldnt make a picture (i ran out of time, had to go to work..)

Now i can't make out what kind of cables it's attached with, maybe someone has an idea?
 

·
Registered
Joined
·
96 Posts
Do you mean 108 access radio? notice yours is left hand drive so base specs may be different. In UK the 'active' trim level has the Pioneer touch screen unit. The base spec access has the radio in your pictures
 

·
Registered
Joined
·
102 Posts
So if someone knows how to remove that last part of the radio?
:D
I'm pretty sure that's a clip down clip which is typical on all radio wire harnesses. The easiest way is the get a hold of a needle nose pliers and use that to grab and lift the clip and pull out at the same time!
 

·
Registered
Joined
·
19 Posts
probably a retaining clip or two somewhere. I assume the two screws at the top do nothing?

Pull on it and see where the resistance is, that might point you to the area that is clipped in place.
 
1 - 7 of 7 Posts
Top