Peugeot 108 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Please help. I have replaced my rear light cluster from UK to continental and in doing so may have effected the working of both the reverse light and rear camera. I understand that I have to cross link the feed for the rear fog and reverse light as they are on opposite sides on continental rear cluster and managed the fog no prob. But Both reverse and camera
were working fine and the bulb is good. I cannot find a fuse for either and am presuming they are connected in someway somewhere? I do not get 12v on the red wire which I beleive is the reverse feed.
Would like to be able to fix myself if poss, is there a fuse? If so where?,Or am I looking at a switch inop somewhere?
An idiots guide is welcomed!
Ty
 

·
Registered
Joined
·
185 Posts
Have you contacted you local dealer about it?
If anything they should be the first to address this unless you went through that process and had no luck.
 

·
Registered
Joined
·
4 Posts
Hi Darren, Would you let me know how you got into the rear light cluster without damaging the inside panel, i have had ago and it seems imposable. Hope you have solved your problem. Cheers Lawrie.
 

·
Registered
Joined
·
40 Posts
Sorry I've not looked at the wiring too much. Make sure all earths are good.

Just out of interest why are you doing this?
 
1 - 4 of 4 Posts
Top